Tag Archives: Photo Of Light Dimmer

Light Dimmer

Installing dimmer switches in your home not only offers you more control in setting lighting levels but also helps you save energy as well. You can easily create a romantic setting in the living or dining room or even chase away the monsters in your child’s closet by manipulating light levels. Dimmers can reduce your electricity bill, as well as extend the life of your light bulbs.

Why Do-It-Yourself is Not a Good Idea

Even if you are a savvy do-it-yourselfer in the home, electrical work is best left to the experts. Many home improvement stores sell dimmer switches and claim that you can easily install them yourself. However, no matter if you live in the northwest or someplace south like Atlanta, electrical contractors have the training and experience to deal with electrical matters safely and efficiently.

Do you know how to switch the power off for the circuit you are working on at the fuse box? Do you understand voltage and alternating currents? Are you confident in taking apart your current light switches and installing switches? Do you know how much insulation to strip off the wires and do you know how to properly connect them to the new switch? Do you have the right tools and materials to safely work with electricity? If you answered “no” to any of these questions, you definitely should not be conducting any type of electrical work in your home.

A professional electrical contractor in the United States has passed the rigorous examinations to earn their license, and is current on all electrical safety standards as outlined in the National Electrical Code (NEC). They can also think on their feet when presented with potential problems like faulty wiring. Can you do the same?

Additional Reasons to Hire a Professional

Did you know that the type of lights you have and their total wattage are two important things to consider when choosing the appropriate dimmer switch? The number of control switches also plays a role during switch installation. Compact fluorescent, LED, incandescent, fluorescent, and the low voltage track light bulbs are just a few types of light that can impact how your dimmer switch works.

The total wattage of the lights that will be controlled by the dimmer switch is important. Many do-it-yourselfers choose a dimmer switch that cannot handle the type of lights or total wattage which can create future problems such as buzzing sounds or even an electrical fire.

Hire a professional electrician for installing dimmer switches in your home. They can anticipate potential problems as well as troubleshoot existing ones, saving you time and money in the long run. The result is energy savings and the ability to control the lighting levels in your home.

By Terrell McCall

Article Source: ezinearticles.com Continue reading

Posted in Uncategorized | Tagged , , , , | Leave a comment

Light Dimmer Picture

Installing a dimmer switch isn’t for the average beginner for safety reasons, but for a professional electrician, it can be done fast. If you are ready to roll up your sleeves and get to work yourself, this article will give you simple step by step instructions on installing a dimmer light switch in your home today.

Step 1 – Safety First

Whenever you start a project, your first priority should always be safety. When installing a dimmer switch you must turn off the power at the main circuit breaker or fuse box. You should also place a piece of tape over the circuit breaker switch to mark that the switch should not be turned on. Before starting to remove the old light switch, double check the light switch by turning it on and off to make sure it is safe to proceed.

Step 2 – Replacing the Switch

Using a screwdriver, remove the screws that hold the old light switch faceplate. When the faceplate has been removed test the switch to insure the volt meter indicates no live electricity. Remove the two screws that hold the light box in place and pull it out a few inches for room to make the change. Remove the wires from the back of the light switch with needle nose pliers to complete this step.

Third – Making the Connections

When installing a new dimmer switch that only has two black wires, it does not matter which black wire is connected to the dimmer switch wires. After these wires have been connected, place a wire nut on the ends of the exposed ends. For added protection, wrap electrical tape around the wire nut. The dimmer switch has a green wire or “ground wire” that needs to connect the white ground wire coming from the wall to the green wire located on the dimmer switch. Place a wire nut on these as well as some electrical tape.

Lastly, push the newly installed dimmer switch back into the electrical box, screw the face plate to the wall and turn the power on. Your new dimmer switch is ready to use.

By Tom Whelan

Article Source: ezinearticles.com Continue reading

Posted in Light Dimmer Picture | Tagged , , , , | Leave a comment